/etc/rc.local is deprecated. FreeBSD’s rc infrastructure can be used to start smokeping by adding a few lines to /etc/rc.conf. If you want to run smokeping with only default options, just add smokeping_enable=”YES” to /etc/rc.conf. If you want to set runtime options, then in addition to smokeping_enable=”YES” you can use smokeping_flags=”<flags>” to set your options.
Example: smokeping_enable=”YES” smokeping_flags=”--master-url=http://slat01.groups.local/smokeping/smokeping.fcgi --cache-dir=/usr/local/var/smokeping --shared-secret=/usr/local/etc/smokeping/slave_secret” From: smokeping-users [mailto:smokeping-users-bounces+slyons=fxcm....@lists.oetiker.ch] On Behalf Of OOSTERS Mario Sent: Monday, March 23, 2015 9:17 AM To: smokeping-users@lists.oetiker.ch Subject: Re: [smokeping-users] FreeBSD slave configuration --> Automatic boot at startup Thank you very much, it is indeed working… I thought I needed to create a special rc.d daemon… This is way simpler!!! Thx a lot! From: Joseph Jackson [mailto:jjack...@aninetworks.net] Sent: Monday, March 23, 2015 1:18 PM To: OOSTERS Mario; 'smokeping-users@lists.oetiker.ch' Subject: RE: [smokeping-users] FreeBSD slave configuration --> Automatic boot at startup You can put it in /etc/rc.local and it will run at boot. From: smokeping-users [mailto:smokeping-users-bounces+jjackson=aninetworks....@lists.oetiker.ch] On Behalf Of OOSTERS Mario Sent: Monday, March 23, 2015 7:17 AM To: 'smokeping-users@lists.oetiker.ch' Subject: [smokeping-users] FreeBSD slave configuration --> Automatic boot at startup Hi, I need to make 30 slaves, each one running on a NUC at one of our agencies in a Virtualbox. I got everything working except one thing that is probably really simple, but I don’t seem to get it… How do I autoboot the smokeping slave using rc.d system. My manual command is /usr/local/bin/smokeping --master-url=http://slat01.groups.local/smokeping/smokeping.fcgi --cache-dir=/usr/local/var/smokeping --shared-secret=/usr/local/etc/smokeping/slave_secret How do I do this now with rc.d in FreeBSD? Friendly greetings, Mario Oosters, System Engineer @ Group S. ---------------------------- ***** Group S disclaimer ***** Deze informatie wordt u gegeven onder voorbehoud van alle rechten en zonder enige nadelige erkentenis. Group S kan hiervoor geenszins aansprakelijk worden gesteld. Ces informations vous sont données sous toutes réserves, sans aucune reconnaissance préjudiciable et ne peuvent en aucun cas engager la responsabilité de Group S. http://www.groups.be/1_mail-disclaimer.htm ----------------------------
_______________________________________________ smokeping-users mailing list smokeping-users@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
