Hi All, New to Smokeping and having a small problem with plotting IPv6 data.
I'm using mostly default config except a minor deviation in that I've added FPing and FPing6 probe blocks as follows: + FPing6 binary = /usr/bin/fping packetsize = 440 blazemode = true protocol = 6 hostinterval = 1.5 mininterval = 0.001 offset = 50% pings = 20 usestdout = true timeout = 1.5 step = 300 + FPing binary = /usr/bin/fping packetsize = 440 blazemode = true protocol = 4 hostinterval = 1.5 mininterval = 0.001 offset = 50% pings = 20 usestdout = true timeout = 1.5 step = 300 Plus a host for Facebook.com to use each probe: *** Targets *** ... + targets ... ++ Facebook menu = Facebook title = Facebook.com host = facebook.com ... + other ... ++ Facebook_v6 probe = FPing6 menu = Facebook (v6) title = Facebok.com (v6 Ping) host = facebook.com (ellipses intentional) But notice I am not pointing at FPing6 binary contrary to the documentation since FPing6 doesn't exist in the repositories for my Linux distribution and according to the project's GitHub the developer unified the branches into base `fping` back in 2015: https://github.com/schweikert/fping/issues/80 So it's fping for both IPv4 and 6, at least for my distribution (is Debian/Ubuntu still making fping6 available?...) Anyway, the issue is no data is being plotted with the FPing6 probe. IPv6 is enabled in my kernel and the wired interface has an IPv6 address. I can also use `fping -6 -C 10 -A facebook.com` successfully. Please let me know how to get up and running. Regards, Ben.
_______________________________________________ smokeping-users mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
