*** Database ***
step = 60
pings = 60
# consfn mrhb steps total
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320
MIN 0.5 12 4320
MAX 0.5 12 4320
AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720
---
Your database section isn't configured to save data any older than 72 days.
1008 minutes of full res data [Just under 17 hours - that's kind of an odd
number, but whatever.]
36 days of 12m data
72 days of 144m data
If you want to have more data, you're going to have to change the database
section to keep more rows.
Your step is 60s - so 1008 samples of 60s data.
Then 4320 rows averaging 12m of data. (4320*12=Total minutes of data. That
comes out to 36 days worth.]
Then 720 rows of 144m averaged data. [720*144=Total minutes of data. That comes
out to 72 days.]
I'll leave it as an exercise to figure out how many rows you'll need to keep of
each sample type to have history long enough to cover the time-frame you want.
But, for example. the 144m samples - if you want 2 years of data [365*2] -
you'd need
365 days * 2 = 2 years or 730 days
730 days * 24 hours = 17520 hours.
17520h * 60minutes = 1,051,200 minutes in 2 years.
Now divide those minutes by 144, and that's how many rows you'll need, if you
want two years of 144m averaged data.
(i.e. 7300)
***That all assumes you continue to use 60s step times. If you change the step,
you'll have to recalculate given the new step size.
If you change your step, you'll either have to re-sample your data, or more
likely, dump the old data and let it rebuild the RRD files again with the
proper structure and lose the historical data.
HTH
-Greg
Hi All,
I am having an issue with smokeping not displaying any graphs older than ~8
weeks. I have it configured to display graphical data for 3hrs, 30hrs, 10days
and 400days.
So far, it does not show anything before the 7th week(in February 2020).
Is there anything I have configured wrongly here?
*** General ***
owner = ######################################
contact = ######################################
#mailhost = my.mail.host
#sendmail = /sbin/sendmail
# NOTE: do not put the Image Cache below cgi-bin
# since all files under cgi-bin will be executed ... this is not
# good for images.
imgcache = /opt/smokeping/cache
imgurl = cache
datadir = /opt/smokeping/data
piddir = /opt/smokeping/var
cgiurl = http://10.20.1.41/smokeping.fcgi
smokemail = /opt/smokeping/etc/smokemail.dist
tmail = /opt/smokeping/etc/tmail.dist
# specify this to get syslog logging
syslogfacility = local0
# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no
*** Alerts ***
to = ######################################
from = ######################################
+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times in a row
+bigloss
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>0%,>0%,>0%
comment = suddenly there is packet loss
+startloss
type = loss
# in percent
pattern = ==S,>0%,>0%,>0%
comment = loss at startup
+rttdetect
type = rtt
# in milli seconds
pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100
comment = routing messed up again ?
+hostdown
type = loss
# in percent
pattern = ==0%,==0%,==0%, ==U
comment = no reply
+lossdetect
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20%
comment = suddenly there is packet loss
*** Database ***
step = 60
pings = 60
# consfn mrhb steps total
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320
MIN 0.5 12 4320
MAX 0.5 12 4320
AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720
*** Presentation ***
template = /opt/smokeping/etc/basepage.html.dist
+ charts
menu = Charts
title = The most interesting destinations
++ stddev
sorter = StdDev(entries=>4)
title = Top Standard Deviation
menu = Std Deviation
format = Standard Deviation %f
++ max
sorter = Max(entries=>5)
title = Top Max Roundtrip Time
menu = by Max
format = Max Roundtrip Time %f seconds
++ loss
sorter = Loss(entries=>5)
title = Top Packet Loss
menu = Loss
format = Packets Lost %f
++ median
sorter = Median(entries=>5)
title = Top Median Roundtrip Time
menu = by Median
format = Median RTT %f seconds
+ overview
width = 600
height = 50
range = 10h
+ detail
width = 600
height = 200
unison_tolerance = 2
"Last 3 Hours" 3h
"Last 30 Hours" 30h
"Last 10 Days" 10d
"Last 400 Days" 400d
#+ hierarchies
#++ owner
#title = Host Owner
#++ location
#title = Location
*** Probes ***
+ FPing
binary = /usr/sbin/fping
*** Slaves ***
secrets=/opt/smokeping/etc/smokeping_secrets.dist
+boomer
display_name=boomer
color=0000ff
+slave2
display_name=another
color=00ff00
*** Targets ***
probe = FPing
Many Thanks,
Debo
_______________________________________________
smokeping-users mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
