Thanks. This should help me too. On Thu, Mar 5, 2009 at 2:04 AM, Hari S N <[email protected]> wrote: > > Hi, > > I'm using SMSLib in Linux (Slackware 12 kernel 2.6.21.5-smp) and it > works well. > Follow these instructions (normal): > > 1. connect your modem > 2. open terminal and type this syntax: > > # dmesg > > sample output: > usb 3-1.4: new full speed USB device using ohci_hcd and address 8 > usb 3-1.4: configuration #1 chosen from 1 choice > pl2303 3-1.4:1.0: pl2303 converter detected > usb 3-1.4: pl2303 converter now attached to ttyUSB3 > > 3. the output above means that your modem attached at /dev/ttyUSB3 > 4. configure your javax.comm.properties file and add your modem > location : > > # Paths to server-side serial port devices (example) > serpath0 = /dev/ttyS0 > serpath1 = /dev/ttyS1 > serpath2 = /dev/ttyACM0 > serpath3 = /dev/ttyUSB0 > serpath4 = /dev/ttyUSB1 > serpath5 = /dev/ttyUSB2 > serpath6 = /dev/ttyUSB3 > > 5. You can now use your modem to send SMS, configuration example: > > SerialModemGateway gateway = new SerialModemGateway("modem.com1", "/ > dev/ttyUSB3", 115200, "", ""); > > ****************************************************************** > > If your modem not detected automatically you can follow these > instructions: > > 1. open terminal and type this syntax: > > # less /proc/bus/usb/devices > > example output: > T: Bus=03 Lev=02 Prnt=05 Port=02 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0af0 ProdID=6600 Rev= 0.01 > S: Manufacturer=Option N.V. > S: Product=Fusion UMTS Quad-GPRS > S: SerialNumber=Serial Number > > 2. find your modem manufacture, edit file /etc/modprobe.conf and add > this line: > > install usbcore modprobe usbserial > options usbserial vendor=0af0 product=6600 > > 3. reboot your computer and do the normal instruction, if your modem > still not detected you have to find your modem driver for Linux. > > > >
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SMSLib User Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/SMSLib?hl=en -~----------~----~----~----~------~----~------~--~---
