Thank you for the reply. I understand SR is not good. I was able to send
and receive by adding this
(gateway.getATHandler().setStorageLocations("MESM")) on the zte modem. But
after 5 inbound and outbound messages it stopped working and I can never
get it to work again. No change to code, any reason? I restarted the
modem and deleted all messages (still no luck), also tried different baud
rates. Please help! What could cause it to suddenly stop working. Here
is a snippet of the log now:
river - GTW: com9: BUFFER: OK
618091 2013-03-21 16:49:57,841 [KeepAlive [com9]] DEBUG
org.smslib.modem.AModemD
river - GTW: com9: RECV :OK(cr)
618091 2013-03-21 16:49:57,841 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: SEND :AT+CPMS="ME"(cr)
618294 2013-03-21 16:49:58,044 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
OKlib.modem.AModemDriver - GTW: com9: BUFFER: +CPMS: 0,100,0,30,0,100
618294 2013-03-21 16:49:58,044 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: RECV :+CPMS:
0,100,0,30,0,100(cr)OK(cr)
618294 2013-03-21 16:49:58,044 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: SEND :AT+CMGL=4(cr)
618497 2013-03-21 16:49:58,247 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: BUFFER: OK
618497 2013-03-21 16:49:58,247 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: RECV :OK(cr)
618497 2013-03-21 16:49:58,247 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: SEND :AT+CPMS="SM"(cr)
618700 2013-03-21 16:49:58,450 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
OKlib.modem.AModemDriver - GTW: com9: BUFFER: +CPMS: 0,30,0,30,0,100
618700 2013-03-21 16:49:58,450 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: RECV :+CPMS:
0,30,0,30,0,100(cr)OK(cr)
618700 2013-03-21 16:49:58,450 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: SEND :AT+CMGL=4(cr)
618903 2013-03-21 16:49:58,653 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: BUFFER: OK
618903 2013-03-21 16:49:58,653 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.AModemDriver - GTW: com9: RECV :OK(cr)
618903 2013-03-21 16:49:58,653 [SMSLib-AsyncMessageProcessor : com9] DEBUG
org.s
mslib.modem.ModemGateway - GTW: com9: CheckMpMsgList(): MAINLIST: 0
620666 2013-03-21 16:50:00,416 [QueueManager [com9]] DEBUG
org.smslib.threading.
AServiceThread - Running...
625673 2013-03-21 16:50:05,423 [QueueManager [com9]] DEBUG
org.smslib.threading.
AServiceThread - Running...
630509 2013-03-21 16:50:10,259 [WatchDog] DEBUG
org.smslib.threading.AServiceThr
ead - Running...
630681 2013-03-21 16:50:10,431 [QueueManager [com9]] DEBUG
org.smslib.threading.
AServiceThread - Running...
630821 2013-03-21 16:50:10,571 [CNMIEmulatorProcessor [com9]] DEBUG
org.smslib.t
hreading.AServiceThread - ** disabled **
635689 2013-03-21 16:50:15,439 [QueueManager [com9]] DEBUG
org.smslib.threading.
AServiceThread - Running...
On Thursday, March 21, 2013 1:49:36 PM UTC-7, Thanasis Delenikas wrote:
>
> Hello,
>
> Huawei E220 creates two (2) virtual ports.The one does work ok, the other
> does not.
> Check if your modem also creates two ports - try to connect to both.
>
> Seeing the log, I can tell that the "SR" location does not work very well.
> Try to leave it out, work only with "SM".
>
> On 21 March 2013 20:01, Ala via SMSLib Discussion Group <
> smslib+noreply-apn2wqc48s1aoea5gss3te_zvx3a_xtwgx_81wascj1gkk...@googlegroups.com<javascript:>
> > wrote:
>
>> I use a ZTE M61 modem and Huawei E560 modem and both having issues with
>> inbound messages (using the .Net SMSLIB 3.5.2 and 3.5.3). I used a
>> Motorola DROIDX phone which works fine (but the phone will split long
>> messages and I don’t want that)****
>>
>> Using either Modem, I am unable to receive Inbound messages. I have seen
>> other posts with similar issue but no resolution. ****
>>
>> ** **If I do not set the memory location (or have SR in it) I get the
>> following error:
>>
>> Exception in thread "SMSLib-AsyncMessageProcessor : modem.com1"
>> java.lang.String IndexOutOfBoundsException: String index out of range: -7
>> ****
>>
>> **At the same token if I set it to ME or MT, will not get an error but
>> will not be get the InboundNotification either.**
>>
>> I have used HyperTerminal to query modem storage locations: AT+CPMS=? and
>> the response was:
>>
>> +CPMS: ("ME","MT","SM","SR"),("ME","MT","SM","SR"),("ME","MT","SM","SR")*
>> ***
>>
>> Also HyperTerminal displays +CMTI: "ME",0 every time an Inbound message
>> is received (but nothing on the SMSLib end).****
>>
>> ** **Using the modem’s web interfaces messages are received just fine. Is
>> there possibly another Internal memory location specific to these modem for
>> this to work?
>>
>> ** **Please see attached log file
>>
>> Thx****
>>
>> ** ***Ala*
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "SMSLib Discussion Group" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected] <javascript:>.
>> To post to this group, send email to [email protected]<javascript:>
>> .
>> Visit this group at http://groups.google.com/group/smslib?hl=en.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msg/smslib/-/ocTGWg8B8fMJ.
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>>
>>
>
>
--
You received this message because you are subscribed to the Google Groups
"SMSLib Discussion Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/smslib?hl=en.
To view this discussion on the web visit
https://groups.google.com/d/msg/smslib/-/9cvNXZZ2JzEJ.
For more options, visit https://groups.google.com/groups/opt_out.
