Hi Mark,
Increasing the timeout is only helpful, if the agent could be in a CPU overload
situation or if there is a network congestion by large IP packets.
In your case, the agent seems to simply “forget” to process the request, maybe
by an overload or other task, maybe because the UDP receive buffer is flooded.
To be sure, that the agent is the problem you could sniff on the network with
Wireshark for example.
Your code seems to be creating a Snmp instance and USM for each requests, which
is total overkill. Especially, the calling “listen()” is very “expensive”
because it binds a network port. Doing this every second could easily block all
ports on your system and might cause a high CPU load - because the SNMPv3 keys
need to be calculated each time fresh.
Please reuse the Snmp and the associated USM for all subsequent requests.
Best regards,
Frank
> On 16. Apr 2019, at 18:55, Mark Ponthier <mponth...@firescope.com> wrote:
>
> I have a program that does an SNMP GET every second against a network device
> using SNMPv3. It is random, but after around a thousand or so requests, it
> times out, and then it starts working again. Regardless of the specified
> timeout or the number of retries, it waits the entire time period and then
> returns a null response PDU. If I have a timeout of 1000ms and retries of 1,
> it will timeout after 2sec. If I have a timeout of 20000ms and retries of 1,
> it will timeout after 40sec. So the amount of the timeout is not the issue
> here. When it decides to timeout it will do so regardless if I wait 2 seconds
> or 40 seconds. The typical response time is usually 5-10ms. I'm wondering if
> this is normal behavior, an issue in the library, or if I just have something
> wrong in my code (see below). Less frequently this is also a problem with
> SNMPv2. I really appreciate any help or ideas you may have!
>
>
> OctetString localEngineId = new OctetString(MPv3.createLocalEngineID());
> USM usm = new USM(SecurityProtocols.getInstance(), localEngineId, 0);
> SecurityModels.getInstance().addSecurityModel(usm);
>
> String oid = "1.3.6.1.2.1.1.1.0";
> PDU result = new ScopedPDU();
> result.setType(PDU.GET);
> result.add(new VariableBinding(new OID(oid)));
> Snmp snmp = new Snmp(new DefaultUdpTransportMapping());
> usm.addUser(securityNameOctet, new UsmUser(securityNameOctet, authProtocol,
> new OctetString(authPassPhrase), privProtocol, new
> OctetString(privPassPhrase)));
> snmp.listen();
>
> String addrStr = "10.0.22.33/161";
> Address targetAddress = GenericAddress.parse(addrStr);
>
> UserTarget userTarget = new UserTarget();
> userTarget.setAddress(targetAddress);
> userTarget.setRetries(numRetries);
> userTarget.setTimeout(timeout);
> userTarget.setVersion(SnmpConstants.version3);
> userTarget.setSecurityName(new OctetString(securityName));
> userTarget.setSecurityLevel(SecurityLevel.AUTH_PRIV);
>
> ResponseEvent responseEvent = snmp.send(pdu, target);
> PDU responsePDU = responseEvent.getResponse();
>
> if (responsePDU == null) {
> LOGGER.error(;
> LOGGER.error("SNMP GET timed out: addrStr[" + addrStr + "], oid[" + oid +
> "]");
> }
>
>
>
> Mark Ponthier | Senior Vice President, Engineering
>
> www.firescope.com<http://www.firescope.com/> | Office: 214.296.9243 x451 |
> Mobile: 214.578.3676
> _______________________________________________
> SNMP4J mailing list
> SNMP4J@agentpp.org
> https://oosnmp.net/mailman/listinfo/snmp4j
_______________________________________________
SNMP4J mailing list
SNMP4J@agentpp.org
https://oosnmp.net/mailman/listinfo/snmp4j
