Normally, I take the winch to the field and thread it through the turnaround, walk out the turnaround while feeding line off the spool (tie one end to the drum first). This way the line is laid out and you don't have to mess with trying to take the line off the spool. This is the ONLY way to do it with mono. If you HAVE to run line off the spool to the winch drum (braided line only, here), take a dowel and run it through the spool, walk back about 20-30 feet and have the best "tapper" you can find run the winch. Wear gloves, hold each end of the dowel the spool is running on and keep a SLIGHT pressure on the spool with a thumb to keep it from overspeeding. Caution, you can burn the line with too much pressure causing line failures. What your tapper needs to do is keep the drum moving at a constant speed (not full blast) sort of like winching a Gentle Lady in a heavy breeze. tap .................................. tap .................................. tap .............................................. tap (and so on) .......................................... Be careful, when the line goes around the end of the spool, it might try and jump out of your hands. Tom Kallevang Wheeling, IL USA RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]

