A normal axial roll is pretty hard because the polyhedral wants to try and
counteract the roll.  You can do what is commonly called a "rudder roll."
Usually this is done with full down elevator and full rudder.  This
combination of controls allows the polyhedral to work with you and help
roll the airplane.  It's not pretty but it works.

Other aerobatics.....hammerheads/wingovers (pull to vertical and use the
rudder to pivot the plane back toward the ground as the airspeed drops to
zero), loops (very easy with a floater type plane), spins (hold full up
elevator till it stalls and then jam on the rudder and hold it).  That's
all I can think of.

Make sure you of plenty of altitude before attempting these, at least until
you get good at it.  Of all of them, I'd say the loop is the easist to do
correctly.

At 11:09 AM 09/29/1999 +0800, Graeme Andrew wrote:
>Hi All,
>
>I'm still new to flying and my question is ... Can a Rudder-Elevator
>polyhedral beginners ship (flat bottom airfoil) do a roll and if so how ?
>
>Also just what is a glider with the above configuration capable of in terms
>of aerobatics. I really want to get as much as possible out of my first
>plane so I am curious about what I can do and how ?
>
>Cheers
>
>Graeme Andrew
>A 'Kiwi' that can fly.
>
>
>
>
>
>
>
>
>RCSE-List facilities provided by Model Airplane News.  Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
>
>
____________________________________________________________________________
Brett Jaffee: [EMAIL PROTECTED]

Brett's Slope and Power Home Page: http://home.earthlink.net/~jaffee
OnTheWay Quake 2 server utility:   http://www.planetquake.com/ontheway
The Unoffical Extra 300 Home Page: http://www.bayarea.net/~nathan/extra300/
____________________________________________________________________________
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to