>I have been looking at a slope foamie (for once not a flying wing)
>and have some questions about aileron size.
NOT a flying wing!?!? BLASPHEMY!
Seriously, ailerons are most often constant chord because no one wants the
hassle of tapering them. Actually having to pickup a sanding block and do
WORK. Perish the thought. Gad, it might even scatter that nasty saw dust all
over the workshop and we can't have that.
A good choice would be to pick your desired percentage of the wing chord and
maintain that value over the span. The ideal choice would be to vary the
percentage over the span according your target values of Cl and lift
distribution during control surface deflections. But thinking of that makes my
dizzy.
What's the appropriate percentage to pick? Good question. Some let their ego
get in the way and choose ridiculously large values. Resist this temptation.
25% is the typical value that is heard very frequently.
On a flying wing (oops there I go again), I also like 20-25%. My latest wing
uses 21.5% at the tips tapered to %8.5 at the root. One of my favorite flying
wings uses 20% at the tips and 10% at the root.
Bill Swingle
[EMAIL PROTECTED]
Pleasanton, CA
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]