|
I have a Hitec CG 325 charger. I purchased a
7-cell, 600 mah pack from NSP after checking with Sal that this would be
campatible with CG 325. Sal told me that as long as the charger was
working properly, that it would work fine. A member of my club
ho is quite experienced with electrics, but not with nimh cells said that this
charger is not suitable due to a different charge curve as compared to
nicads. Can someone elaborate? I called Hitec, and the tec rep said
it was quite acceptable use it
I verified the status of the charger on a 6-cell,
1200 mah pack and an 8cell tx pack. Everything seems to be working
normally. When charging the 600 mah nimh pack however, it gets noticeably
warmer than the others. I tried to get a read on the temperature with a
meat thermometer, but due to it's shape it wouldn't register. I would say
that it was not uncomfortable to hold, but it was very noticeably warm. I
charged the pack on the .9 amp setting, which is the lowest one.
I am concerned that I might be damaging this
battery. Can anyone tell me if this is the case on the basis of the very
subjective info I have provided? Should I charge at 1.6 amps, which Hitec
also recommeds for this pack? How can I be certain that I am not damaging my
battery. Any help is gratly appreciated.
Thanks
|

