Back when I used to race Hobie 16s, one of the many racing tricks was to
sand off the gloss finish on the hulls with very fine grit sandpaper- this
resulted in a slightly faster boat- something along the lines of the guy
sanding his Pik-20 wings I guess.  Walter
-----Original Message-----
From: Andrew Dignan <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, January 05, 2000 8:04 AM
Subject: Re: [RCSE] Ideal wing surface texture


>I have been made aware that sometimes a rough wing texture can indeed
>increase performance in full scale gliders.
>
>    A few years ago, some tests were run on a PIK-20.  The tester then re
>did the wing and had sanded it down with 600 to true the surface.  He flew
>the glider and tested it just for grins.  He was surprised to find that the
>glider had a few more points of L/D.  When he finished the wing off with a
>gloss smooth finish, the points disappeared.  Hummm.
>
>
>  Maybe it would not be a big deal with the Lower R's in the model world.
>
>
>Andrew
>[EMAIL PROTECTED]
>RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]




RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to