I recently got a new glider from NSP, the MICRO 1.5.  it is made by KB
Modle in Czech Republic.
it was very nicely finished, airbrush painted!
the flying is excellent!
the day i made the first flight wind was very calm, foamies were
struggling to stay up.  the Micro1.5 was able to fly up as hi as the
HLGs.  speed dive, rolls and loops...it sounded like a jet when it pass
by fast.  amazing!
then the landing!  i carefully landed on the thickest grass, with
airbrake full.  it sounded like a smoothe landing.  surprisingly, i
found one crack one inch long, and 3 holes on the wing skin.  another
crack was produced when we were examining  by finger pressing on the
fragile wing skin. i have never had another hollow molded plane before,
but this is like egg shell.
a week later, i was landing it ,the wing tip hit some grass, the plane
spin 360 into a landing, the left wing LE is cracked.
Sal told me the wing was Carbon but i am not sure where it is used.
the vtail fitting fail too.  the single 1mm steel bolt stripped and the
vtail came loss. they should really use 2 bolts.
this glider is especially good for light wind, the fastest! and
loudest.  but the fun is also reduced by its fragillity.

Raymond Wong

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to