Mike, Don and all other Supra owners, I went to a metric fastener specialty
shop and bought longer 4mm flathead capscrews at 35mmL(front) and 25mm(rear),
these are 5mm longer than my supplied phillips head screws which only gave
minimal engagement as I mentioned in an earlier post.
I now have 9.5mm full thread engagement. I could supply the longer pieces for
.22cents(front) and .15 cents(rear) plus a small amount for postage to any one
who can't get their own. These are black phosphate coated, allen, flathead
capscrews in a hardness equivalent to SAE grade 8.
Contact me on or offline for these capscrews.
Regards, Dave Corven.
-------------- Original message ----------------------
From: [EMAIL PROTECTED]
>
> In a message dated 2/16/06 12:00:35 PM Pacific Standard Time,
> [EMAIL PROTECTED] writes:
>
>
>
> I am only posting this so other Supra flyers can inspect there ships to see
> if they need to get a longer screw for the rear bolt. We would hate to loose
> any ships to this problem.
>
>
>
>
>
> Check my web site under photos for the Supra write up and the dimensions
> of the bolts.
>
> Don Richmond
> San Diego, CA
> [EMAIL PROTECTED]
> www.hilaunch.com
--- Begin Message ---
In a message dated 2/16/06 12:00:35 PM Pacific Standard Time,
[EMAIL PROTECTED] writes:
I am only posting this so other Supra flyers can
inspect there ships to see if they need to get a longer screw for the rear
bolt. We would hate to loose any ships to this problem.
Check my web site under photos for the Supra write
up and the dimensions of the bolts.
Don
Richmond
San Diego,
CA
[EMAIL PROTECTED]
www.hilaunch.com
|
--- End Message ---
