Speaking of John Derstine, has he ever been heard of since? Was his whereabouts ever discovered? I have done business with John in the past, read quite a few of his posts and always wondered what ever happened to him.
Best wishes Cliff Lindgren -----Original Message----- From: Douglas, Brent [mailto:[EMAIL PROTECTED] Sent: Thursday, March 30, 2006 6:58 AM To: [email protected] Subject: RE: [RCSE] Covering Obeche over white foam Hey Russ, I can't find the article, think it disappered when Mr. Derstine did, but the gist of it was to use Ultracote. I've used that directly over foam, will take a much lower temperature. I'm going from memory, but the main point was to get a good surface first. Fine sand the obechi (200 going towards 400 grit), vacuum the dust, and then use a cheese cloth (?) and wipe the wings to get down to clean wood. I'm doing the same thing in the next 2 weeks - 5M obechi wings, bought some Ultracote in bulk - should be fun. Good luck! Brent RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
