----- Original Message -----
From: "Soaring" <Soaring@airage.com>
To: <Soaring@airage.com>
Sent: Thursday, May 18, 2006 7:18 PM
Subject: Soaring V1 #7658
Soaring Thu, 18 May 2006 Volume 1 : Number
7658
In this issue:
JR 6102 TX
----------------------------------------------------------------------
Date: Thu, 18 May 2006 13:39:21 -0700
From: "Dan Borer" <[EMAIL PROTECTED]>
To: "[RCSE]" <soaring@airage.com>
Subject: JR 6102 TX
Message-ID: <[EMAIL PROTECTED]>
Hi All--
A buddy of mine has a JR 6102 six channel radio and wants to set it up to
work on an RES plane with two spoiler servos. I assume I can plug the
rudder
servo into the Aileron channel to get the right stick to be the primary
control for the rudder. One spoiler would be plugged into the Throttle
channel and the other spoiler could be plugged into any other unused
channel
and then mixed to the Throttle channel to get both spoilers to work off
the
spoiler (throttle) stick. Finally the elevator could be mixed to the
throttle channel to provide elevator compensation when the spoilers are
deployed.
Will this set up work or is there a better way?
Thanks for your help.
Dan
------------------------------
End of Soaring V1 #7658
***********************
RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED] Please note
that subscribe and unsubscribe messages must be sent in text only format
with MIME turned off. Email sent from web based email such as Hotmail and
AOL are generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
