---------------------------- Original Message ---------------------------- Subject: RE: [RCSE] Beginner sailplane recommendations From: [EMAIL PROTECTED] Date: Sat, May 27, 2006 10:05 am To: [EMAIL PROTECTED] --------------------------------------------------------------------------
The EasyStar (54 inch) is much smaller than The EasyGlider (71 inch). Both made by Hitec / Multiplex EasyGlider does come in a Electric or glider versions only. EasyGlider http://www.hobby-lobby.com/easyglidersail.htm EasyGlider Electric http://www.hobby-lobby.com/easyglider.htm EasyStar http://www.hobby-lobby.com/easystar.htm Review http://www.rcgroups.com/links/index.php?id=4728 I've witnessed the one in the review. It handles so well that the local club members now has over a dozen of the glider versions for aero-tow and same plane design contests. The Easy is design for thermal duration and is a "floater" because of that. That is what beginners need. If you want a glider to penetrate, you will need a higher performance glider. Either heavier or faster airfoil. Neither is desired for a "beginner." > I have assembled and flown both Easy Star and Easy Glider (non-motorized > version) and recommend the Easy Star as a first plane to learn on. It > glides very well and is much easier to handle and transport on the ground. > > As was mentioned by Ed Anderson, Easy Glider does not penetrate well > unless it is ballasted and a hefty nose weight added. I put 2 inch long > steel rod pieces in the spar tube and another couple of ounces in the nose > to make it penetrate on the slope. > > For Easy Star, a beginner is likely to corkscrew the plane unwittingly. I > helped a friend recover from one and the wing broke at the end of the > spar. A length of fiberglass tape from the wing root to over the curved > wingtip edge solved this weakness. I also like to dive the Easy Star full > throttle on a brushless motor and found the horizontal stab lose authority > in recovering from steep dives, resulting in my Easy Star taking a dunk in > the Han River of South Korea on more than 1 occasion. This too was solved > by adding a length of fiberglass tape on the bottom surface of the > horizontal stab and the elevator. One more modification for a beginner > Easy Star is to fix the wing to the fuse. I found the wing roots get > loose after few insertions, removals and tumbles. Of course, having a > minivan big enough to carry the fully assembled Easy Star is helpful too. > I get fine directional control with the stock rudder - just have to be > patient and wait for the plane to listen to your directional control input > or anticipate the necessary change in direction by a few seconds :) > > Hee-Choon Sam Lee > Seoul, Korea > Member of RCCAFE, AMA 817622 > >> Personally I'd recommend the Easy Star since it's electric, he'll get >> more flying time in per session. I'd recommend making the rudder 1/2-1" >> wider since the rudder is pretty small. I taught my brother-in-law to >> fly with one. gv >> >> -----Original Message----- >> From: Jim Laurel [mailto:[EMAIL PROTECTED] >> Sent: Friday, May 26, 2006 5:23 PM >> To: RCSE Yahoo >> Subject: [RCSE] Beginner sailplane recommendations >> >> I know this has been discussed before, but wanted to get your current >> thinking. A co-worker hears me talking about soaring all the time and >> is asking about a sailplane for his son. Years ago I would have >> suggested a Highlander, but they are no more and there don't seem to >> be any really credible (i.e., decent performing) foamies. If you want >> a nice molded TD plane, I can talk all day, but when it comes to this >> kind of plane, I'm at a loss. >> >> I'm thinking about recommending the Multiplex Easy Glider, which is >> inexpensive and readily available from Tower Hobbies: >> >> http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKHS7&P=7 >> >> Any ideas appreciated. >> >> .............................. >> Jim Laurel >> Co-founder >> Twango Inc. >> mob 425.985.4849 >> ofc 425.883.1638 >> http://www.twango.com/profile.aspx?twangoid=jim >> >> >> >> RCSE-List facilities provided by Model Airplane News. Send "subscribe" >> and "unsubscribe" requests to [EMAIL PROTECTED] Please note >> that subscribe and unsubscribe messages must be sent in text only format >> with MIME turned off. Email sent from web based email such as Hotmail >> and AOL are generally NOT in text format >> >> RCSE-List facilities provided by Model Airplane News. Send "subscribe" >> and "unsubscribe" requests to [EMAIL PROTECTED] Please note >> that subscribe and unsubscribe messages must be sent in text only format >> with MIME turned off. Email sent from web based email such as Hotmail >> and AOL are generally NOT in text format > > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" > and "unsubscribe" requests to [EMAIL PROTECTED] Please note > that subscribe and unsubscribe messages must be sent in text only format > with MIME turned off. Email sent from web based email such as Hotmail and > AOL are generally NOT in text format > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
