Silicone II is the worst caulk I've ever used. (I got it free after rebate
at HD) I used it on my house in some places, and it took forever to cure,
did not smooth out well and was not very good. I had to pull it all out.
It came off easily in one long strip. I went back to good old acrylic caulk
and standard silicone.
I use goop for my servos. In planes with the servo area reinforced, I just
put packing tape around them, sand the tape a bit, put a dollop of marine
goop on and wiggle it in place. Great on carbon and glass, but not for
foam. For that, I just tape up the servo and use two part liquid foam. A
little goes a long way. Great for holding control rods in the fuse also.
You can get some at BP (Balsa Products)
http://www.bphobbies.com/view.asp?id=V907984&pid=U221687
Tom
----- Original Message -----
From: "Robert Samuels" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, June 22, 2006 4:52 PM
Subject: [RCSE] Silicone
The reason I used Silicone II is that it does not release acetic acid when
it cures. However it does not seem to cure for me. I remember reading
here that the Silicone II was ok for servos. Anyone have a solution for
the problem I'm encountering? I now know not to do what I did, but I did
it and now I need a remedy. Heeeelp!
Robert Samuels ............... St. Louis
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED] Please note
that subscribe and unsubscribe messages must be sent in text only format
with MIME turned off. Email sent from web based email such as Hotmail and
AOL are generally NOT in text format
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.2/372 - Release Date: 6/21/2006
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format