Why would the co ax be a problem, unless you used it to hang up the TX ? Regards, Dave Corven. -------------- Original message ---------------------- From: Mike Lachowski <[EMAIL PROTECTED]> > 9303 2.4 vs module will get you model match. E.g. The model > configuration will be matched to the RX. So you can't mismatch the > program with the model. > > 9303 2.4 sends updates to the servos more frequently. You might notice > this as faster response. Some pilots have added some additional > exponential to deal with the improvements in response time in the entire > pilot / radio / model control loop. > > You can transfer programs from the stock 9303 to the 9303 2.4. They > will copy from TX to TX. > > You won't be able to use your old 72 MHz stuff with a 9303 2.4 > > You don't have to worry about the coax wire on the 9303 2.4. > > > dharban wrote: > > I'm sure its been discussed elsewhere, but can someone describe the > differences in performance that you can expect with the JR 9303 2.4 > transmitter and a JR 9303 transmitter equipped with the Spektrum Module > system. (Both using the AR 9000) > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and > "unsubscribe" requests to [EMAIL PROTECTED] Please note that > subscribe and unsubscribe messages must be sent in text only format with MIME > turned off. Email sent from web based email such as Hotmail and AOL are > generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
