Graupner / Multiplex 6-pin is nice. A little easier to assemble /
disassemble than the Deans.
Also, you need proper strain releif. After soldering, heat stringing,
either cover the whole thing with one big piece of heat shrink for the
Deans, I think about 1/2" tube fits over it. Or you can use some hot
glue to build up the strain releif area plus give you a little more to
grab on other than wires.
[EMAIL PROTECTED] wrote:
I'm assembling a model with a 2 piece wing that bolts onto an AVA
fuse. Does anyone have any advise on some thing better than the 4 pin
deans connectors I normally use? After a month or so I end up breaking
the wires on them and they are getting harder and harder for my old
arthritic fingers to use. Thanks Brian Smith
RCSE-List facilities provided by Model Airplane News. Send
"subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
Please note that subscribe and unsubscribe messages must be sent in
text only format with MIME turned off. Email sent from web based
email such as Hotmail and AOL are generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format