If you like plywood, you will love tempered hard board.(masonite)
The best aluminum I have used is .015 that is used for rain gutters.
Thick enough to stand up, thin enough for scissors.
I find .010 to thin for anything but one time cuts.
I have used masonite for most templates, it holds up for at least
300 cuts.
I just made some with formica, but they warped.........

         Mark Mech
[EMAIL PROTECTED]
    www.aerofoam.com


> For templates I use good ol' plywood.
>
> 1. Print the template on paper,
> 2. Cut it out with scissors,
> 3. Use 3M77 to stick the paper to the plywood,
> 4. Take the plywood to the band saw and cut around the paper,
> 5. Lightly sand the edges of the plywood to make it extra smooth.



RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to