Hey Rodger!! I have the same passion as you. Although with no ailerons, My answer was the ACE Easy Eagle. This is a 2m built up plane on rudder elevator and flaps. This set up requires 3 standard servos. Only problem is that these kits aren't being produced any more. So you would have to do a little searching but i promise it is worth it. Go look at the market and I dont believe you will find a 2M built up floater with flaps that uses 3 standard servos.I put a wanted add on here and got two resposes and I now have 2 kits. I'm gonna start building one next week and I'm gonna keep the other one as a pattern to cut myself some extra planes. This plane has a very strong wing if you beef it up a little with carbon strips. I can drop the flaps about a 1/4 inch and tap the winch a few time and this plane will go nearly virticle. If your very talanted and coordinated you can drop the flaps and land it on the tip of your nose. Try to find the ACE Easy Eagle with the SD 7032 airfoil, designed by Harley Michaelis. On both kit boxes there is the number 50k233. This may be the stock #. good luck Jeremy Smith -----Original Message----- From: Rodger Hamer [SMTP:[EMAIL PROTECTED]] Sent: Thursday, March 23, 2000 5:50 PM To: [EMAIL PROTECTED] Subject: Re: [RCSE] Full House 2M floater I am looking for an easily built full house 2M floater type plane..I built a Highlander, but would rather try a more classic floater type, you know slow and easy..though with at least some penetration. Any recommendations? Rodger RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
