Scobie--Sorta adds a little "class" to our groupe, doesnt it? I am
specking out my DAW 1-26 hlg on our slope, by the way. Have a Zagie
finished now waiting on a couple of mail order servos. Will fly it on a 4
channel Futaba and use an Ace Mixer that I have had for years and never
tried. Seeya someday----JimAt 11:08 AM 3/27/00 -0800, Scobie Puchtler or
Sarah Felstiner wrote:
>On tensioning mechanisms for hotwire bows, Mario, from Italy wrote:
>
> "I use the one employed to tension the aerial TV wires." <SNIP>
>"A vineyard tensioner could be ok the same."
>
>Great post. I especially like the suggestion of using a vineyard tensioner.
>I'm not quite sure what it is, but I think its about ten times more likely
>that the average RC builder in Italy has a few spare vineyard tensioners
>kicking around, than the average RC builder in the USA! Thanks for adding
>some non-USA culture to the list!
>
>Now the guys who fly in Napa Valley and all use vineyard tensioners on their
>cutting bows are gonna be all over me. Flame suit ready, but not all the way
>zipped up. yet.
>
>Lift,
>Scobie in Seattle.
>
>
>> -----Original Message-----
>> From: Mario Marzocchi [mailto:[EMAIL PROTECTED]]
>> Sent: Sunday, March 26, 2000 1:26 PM
>> To: [EMAIL PROTECTED]
>> Subject: [RCSE] re:cutting bow tensioner
>
>RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
