I broke the carbon tube spar in my EPP Cyclone this weekend. The top of the wing hit flat on the slope face in a failed attempt at a landing. I still need to do some more forensics, but it looks like the spar is two 36" tubes joined at the wing center with another inner tube. The break occurred right at the end of the inner tube. Can I splice this joint with another smaller inner tube or an outer tube, or should I build a new tube spar and replace the whole thing. The TE is balsa and /or spruce and it broke also. Can this be repaired using CA or Epoxy, or should I replace it too? This is the first plane I've had that I didn't built myself, so I don't have a "feel" for it as much as my others. Weight is not really an issue and aesthetics are out the window already =) TIA -Silas- RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
