Go On Hitec's Web site and call them they are in Poway and they will take
care of the problem they do good work and should not charge you anything
call them first for a RMA Number see ya Mike
----- Original Message -----
From: "Gary and Tracy Humphrey" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, May 06, 2000 8:07 PM
Subject: [RCSE] Bad Hitec servos
> I recently purchased 6 Hitec HS-85 MG servos. Four out of the six servos
> have way to much gear slop. With the radio on you can move the control
horn
> at least a 1/32 ND of an inch which translates to about 3/16 " at the
rudder
> of my new plane. There is no way the servo can even start to center. I
> installed 4 out of the 6 servos at the same location and only two were
> acceptable.
> I don't know if it's just the metal gear version or what.
> Is there any way to contact Hitec ? or can I replace the gears or what?
> Thanks ~Gary
>
> RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
