Ah, but that's where the multi-point mixing comes in handy.  Simply program
the elevator offset in the single point where the flap stick is at the top
of its travel, then all one has to do is move it down off that point (and
granted, to or past the next point, but that's a very short throw) at
launch.  Discrete positioning not required, just somewhere near mid-range.
Easy to do this and quite consistent using your thumb at the base of the
stick.

Personal preference, but I would think that the gear switch location is
harder to effectively and quickly reach/operate.  I'm also disappointed that
a radio in the 8103's price range doesn't offer the flexibility of assigning
such obviously popular functionality to the existing spring-loaded switch in
Glider Mode.

----- Original Message -----
From: "Tom Hoopes" <[EMAIL PROTECTED]>
To: "Tom Watson" <[EMAIL PROTECTED]>; "Bill Harris"
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, August 21, 2000 8:03 PM
Subject: Re: [RCSE] HLG launch Tx presets


The advantage of a HLG preset switch (spring loaded) allows for positive
actuation and predictable elevator offset when preparing to launch,
especially during critical tasks such as flying a ladder format. Positive
elimination of launch preset is just as critical to insure an effective
climbout and subsequent bunt (round over). I have found that discrete stick
positions are hard to repeat for this function, especially during a vigorous
launch.


RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to