>...aileron control rods on top... This is the way my DAW 1-26 is setup, shouldn't be a problem. I don't take the wing out of my DAW 1-26, since it fits in my car (sideways). If you have to remove the wing, you either need to remove one of the rods and aileron clevices, or make a notch in the fuse for the aileron clevice to slide through. >...balsa tail... The DAW 1-26 kit uses a solid balsa tail, this should be OK also. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]