I had my first practice this weekend too.  As I expressed my interest in the
sport and there was no place in Northern California to see how it was done.
A veteran of the sport met me at a field near Sacramento for day of
one-on-one.  

We started out with his heavier older ships, he would through and let me
drive.  Just big loops, to get a feel of maneuvering close to the ground.  I
felt bad, he was doing all the work and it was a hot day.  By the end of the
day, he had confidence in my abilities and we moved up to his 9oz
competition level ship.  I would throw it, he would fly.  He would throw it,
I would fly.  I was trying to get a feel for all the different controls.  He
has his plane setup with everything, so I was playing with camber, flaps,
spoilerons, just to get a feel for all of the different settings.

It was fun, when I concentrated, I could bring it back in all the way back
in to us and he could catch it.  In fact, one instance, I was out of steam,
a two feet off the deck going down wind.  He said if you get low just keep
the wings level and land.  A gust came by and picked the nose up a bit so I
banked in a turn and brought it the 25 feet back, just working it right on
the deck.  My tutor, walked over at that point and shook my hand.
"Good-job" he said, "you did everything right."

Needless to say, I am hooked.  As much for the fun of flying as meeting
people who are generous enough to drive an hour to meet with a beginner to
share their knowledge and love of the sport.

Thank You!

Jim Cubbage

-----Original Message-----
From: Bill Harris [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 28, 2000 7:50 AM
To: [EMAIL PROTECTED]
Subject: [RCSE] First handlaunch


First handlaunch practice this weekend.

I spent over two hours Saturday throwing my new Chrysalis HLG around at the
sod farm we usually fly at.  Since I was throwing "into the wind" (direction
influenced by whatever thermal was nearby), I pretty much did a random
wander around the sod farm and didn't spend much time at the usual launch
site.  I worked at getting the HLG trimmed and balanced and getting my
throwing arm trained.  There was minor thermal activity and my best flight
was a couple of minutes.  

The HLG doesn't seem to have the rudder authority I think it should, so I
wasn't able to ride into thermals like I wanted to.  I'll tinker with this--
it may be balance, or lack of washout (initially I set it at -0-, and add
washout as needed) or control throws, or that I was flying slow at or near
stall speed.

It might seem to have been waste of time to drive the distance out to the
sod farm for handlaunch practice, but, as I figured, this was the best
approach.  I needed a _large_ expanse of soft lawn so all I had to do was
toss and land and not have to worry about going off field into the briars,
bushes and brambles, or have to keep walking to the other side of a smaller
field to launch into the wind.  Initially I did simple straight-line "test"
glides and eventually worked up to get some altitude and bring it around 180
deg to catch the glider (this was the "goal" I was working towards that
day).

I'm hooked.

--Bill
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to