|
Dave The mounts you refer to were made
by Soarcraft--615 N, Farr Rd, Spokane, Wa 99206 Ph
509-926-8107. I dont know if they are still in
business. Jim
----- Original Message -----
Sent: Saturday, December 09, 2000 7:39
AM
Subject: [RCSE] Servo mounts
I have a Shadow Plus I got second hand that has some servo
mounts that I'm trying to find.
There is a square, thin 2" x 2" panel of basswood that forms the servo
well cover. The panel sits down inside a small wood frame glued flush
with the wing surface. The panel is held in place inside this frame by 4 small
screws, 1 in each corner. The servo is attached to the inside of this
panel by double sided tape. The edge of the panel is notched so the
servo arm can protrude through.
Its a clean and simple mounting method. I can probably make them
myself but I'd rather buy them.
Anyone have any idea where they can be had? ...or does anyone have
any other mounting methods or know of any mounts for wing servos?
TIA
Dave
|
