Hi Gerard,
Opinions are divided on this one, but most advice against using the arrow
shaft because they consider it not necessary and adding too much weight.

>I would think that using something solid like an arrowshaft would ruin this
springy-ness,
I don't think so; the arrowshaft (or carbon rod) would also bend an sping
back, but not that easy, _and_ would keep the fuselage from completely
shearing (is that the right word ? My motherlanguage is not English) off in
a hard crash (I think).

>When I highstart this plane i have to give it more and more up to keep it
going the way I
>want it to, it wouldnt surprise me that this is caused by the bending of
the tail,
sounds logical

>I ever build another one i'll try the arrowshaft trick too, just to see if
it makes a
>difference.
I was thinking of not doing it right now but adding it later if necessary;
why would you wait until you ever build another one ? Is it hard to add on a
finished plane ? You would of course have to (at least) partially remove the
covering from the bottom, or would it be feasible to shove it in from the
back to the front, trying to keep it straight in the horizontal and vertical
plane ?

I will have a look at this suggestion:

>Don't.  Use plastic straps that often wrap boxes or paper (white or yellow
>with small diamond shapes on the surface).  3M77 them on the outside of the
>fuse, before the tape, in either crossing double helix pattern or four
>longerons.  These will actually make the structure much stiffer than the
>thin arrow shaft, and it you use the helix pattern, will provide torsional
>strength as well.

BTW, you do realize that just responding to your message generates a wrong
email adress ? It gives this as your address: [EMAIL PROTECTED]

CU,

Stefan.

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to