Does anyone know a source for titanium rod/wire in approximately 3/32 inch 
diameter equals about .093 inches equals about 2.3 to 2.4 mm, or somewhat 
smaller even? Intended use is a bent two-piece wing connector for a HLG wing 
that has a dihedral angle too great for a straight carbon fiber rod-in-tube 
or tube-in-tube. Since titanium is as strong as steel but lighter than 
aluminum, it seems like good stuff for this application. The smallest Small 
Parts has is 1/4 inch.

Another desireable solution would be a carbon fiber rod that size with the 
correct bend, but is finding that impossible?

Suggestions welcomed.

TIA

Al Nephew fending off GPS in
Duluth, MN
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to