Flying a sim before taking lessons will help with the hand-eye coordination. If he's
a good stick with a flight sim, odds are he'll be a good stick in a real plane. He
can also learn cross country flight planning, and VOR, NDB and other navaids.
-Ben
gabe baltaian wrote:
>
> Hi all,
>
> I good local r/c flyer wants to get his PP license for personal reasons and, if
>possible, maybe pursue it to a career flying
> profesionally. (He's still young enough that this is do-able and doesn't like his
>current job all that much.)
>
> Anyway, for scheduling reasons he can't actually start flying till late Jan but he's
>currently practicing via FS2000. I told him
> that this is generally a bad idea because he could develop bad reflexes that he'd
>never be aware of until they turn around and bite
> him (for instance, I don't think that most FS pilots bother with carb heat and other
>"niceties").
>
> I suggested that after he has 6-10 actual hours he could start to augment actual
>time with FS-time, but before that it's probably a
> bad idea. One of my instructors used to say that "Practice makes permanent" and I
>think the odds of getting stuck with bad habits
> are too high with FS.
>
> Does anybody have any ideas on how to do this safely (if at all)?
> ========
> In a related idea, I'd mentioned that he may want to rig up a camcorder to videotape
>his actual lessons for later review. Not being
> the sharpest knife in the drawer I used to learn as much on the drive back from a
>lesson thinking back on it as I did during the
> actual lesson itself so I think a tape record of each lesson would help.
>
> However, rigging up a camcorder to have a good view might be hazardous in case of
>sudden deceleration and it might also damage the
> camcorder because of high vibration levels. A better solution may be a decent color
>board camera hooked up to a cheap DC-powered VHS
> with a small gel cell. The VCR could be safely sitting strapped to the rear shelf in
>a nice padded box so it's safely secured out of
> harm's way and also receives minimal vibration. The camera itself would only weigh
>1-2 ozs so it wouldn't present any sort of hazard
> and would be much easier to mount. He'd have to buy these things from scratch but
>we're only talking about $300 or less which I
> think will prove worthwhile in the long run. Had anybody tried this before? Do you
>all think it would be a good idea?
>
> The only thing I'm not sure about is how to aim the camera. Some of these things
>need help focusing and the rig I described above
> does not have a monitor. A small LCD one could be used to frame the shot, but
>they're too low-res to focus the lens. Any ideas?
> =========
> Lastly, I have an old set of Thrustmaster sim pedals someplace in the attic. As I
>recall there were no brakes of any kind available
> on the pedals when I bought them. It seems that some current pedals support brakes
>but do any of them support independent left /
> right toe brakes? Is it possible to retrofit this?
>
> Thanks,
> Gabe
>
> RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
>"unsubscribe" requests to [EMAIL PROTECTED]
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]