Hi Russ,
Just to verify your comments:
This is the same problem I was having on the maiden flight of my
SchpotDorker this last Saturday. If you remember one of my launches went
steeply to the right and I very nearly bought it.
Sometimes, but not always, the port flap servo(85mg) hunts for neutral. On
this particular launch the left flap must have drooped more than the right
thereby causing a sharp rolling moment to the right.
I suppose I should feel lucky that I only have one in six with a problem.
Roy Stubbs
Edmonds, WA
----- Original Message -----
From: "Russ Young" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 30, 2001 8:58 AM
Subject: Re: [RCSE] Hitec Servo Problems
>
> > Has anyone been experiencing problems with the 85bb or 85mg servos
> from
> > hitec. In the past two weeks I have found a total of 3 that have a mind
> of
> > their own.
> > These thing won't center and won't sit still - they just keep
> chattering!!!
> > Out of a total of 6 servos bought 3 were bad news!!!
>
>
>
> Not personally, but a club member was out for the maiden flight of his S
> dorker Saturday that had 85mg's in the wings. He was having the problem
> just as you described with one of them. I have never had a problem with
> them so was tempted to question him, now I'm not so sure.
>
>
> Russ Young
> Bellevue WA
>
>
> RCSE-List facilities provided by Model Airplane News. Send "subscribe"
and "unsubscribe" requests to [EMAIL PROTECTED]
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
