Well I finally have just a few tiny bits left to do on my viking Salto.
Only taken two years....

The bad news is the weight; I balanced it tonight (using the 65mm from
leading edge figure from the plans) and had to add THIRTEEN ounces to
the nose!!!! Eeek. The all up weight is a worryying 5lb, or 21oz/in^2.
Hope there's some good winds in my future... Can't see many places to
save weight; the fuz is almost empty - one bulkhead of 1/8th ply to
support the main joiner tube, the wings are glass over pink foam with
MPX flat servos, the tail is glass over pink foam (my first bagged
items) driven by 94141s. I could imagine really light tails saving an
ounce & therefore ~3oz in AUW, but any really big saving would mean
completely different wings :-(.

The major item left is control surface movements. No indication on the
plan, and the amounts I have right now are good for swimming but
probably a little over the top for a sloper. I imagine something more in
the 1/2" range than 1+" !

If anyone has built one of these and can offer suggestions (Dave
Sanders, where are you? I built the wing according to your suggestions
and can't find your email address anymore!) from experience, I'd be
delighted to hear them.


tim

-- 
Tim Rowledge, [EMAIL PROTECTED], http://sumeru.stanford.edu/tim
Useful random insult:- Renewable energy source for hot air balloons.

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to