you may have to ask around, but i found 1 1/2 and 2 inch pink at our Home
Depot... you would have a terrible time getting a template on that w/ that
little clearance....
good luck!
brent
> -----Original Message-----
> From: John Gossett [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, April 30, 2001 1:27 PM
> To: soar
> Subject: [RCSE] Pink foam thickness for cores.
>
> Hello!
>
> I have everything I need for cutting foam cores except
> the wire and foam. Just need to build my cutting
> station.
>
> I went to Lowes and Home Depot to check out foam
> availability and both had Corning pink foam in huge
> sheets (lots of potential wings there), but the
> thickest sheets were 3/4". In the pictures I have seen
> posted, it appears that the foam is a lot thicker than
> that. (perspective problem?) The template for the
> Terminator I have is a touch less than 5/8" at its
> thickest, leaving a touch more than 1/8" to spare for
> template base thickness and kerf. Am I supposed to
> look for 1" thick or thicker foam?
>
>
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]