John,
I am not a fiberglass expert. Wish I wuz. Anyway, I just drape excess
3/4 oz glass over the bottom and put the WU on. I then rolled it 90 degrees
at a time until it wuz dun.
As far as cutting it and having fuzzy edges, the WU is much less sticky
than the epoxy so you don't pull on the cloth as much. I cut it with
scissors (yes messy) but left enough so the edges were nowhere close to the
fuse. Leave the excess on the fuse over the wing saddle and trim it when
the WU is dry and the glass is stiff - it cuts very nicely with a good,
sharp blade.
Make "relief" cuts in the cloth as you get to the nose the same way you
do with monokote and overlap a little. The thin glass makes the overlap
really hard to see and the grass stains and rock scrapes eventually hide the
rest anyway.
Put the second coat on after the first is dry.
Sorry, I just kinda did it, griped some while I was doing it, made a
slight biff on the front and am almost ready to retire this fuse anyway. I
nosed it in on a gorilla launch, cracked the fuse, and now the ship is
almost 12 oz.
Here is a link to a glass handling tip. The tip says the glass is much
easier to cut this way - I haven't tried it.
http://www.charlesriverrc.org/articles/construction/williamson_fiberglass.ht
m
Bookmark this page/site - you'll probably end up reading almost the whole
thing like I have. While I'm posting great informational site links - here
is another fine collection of articles.
http://www.torreypinesgulls.org/articles.htm
My site has these and many more in some loose categories for ease of finding
what you need. I wouldn't put it in the same class as these other links
because I am just a "link leech", but I think you'll like it anyway.
http://home.adelphia.net/~sliderule
I should have pics of my Terminator HLG on my pix page shortly after you
read this.
Good luck
Tom Koszuta
Buffalo, NY
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]