That is a good article. Another article on 'glassing a fuse is at Jim Ryan's site, in the Downloads section: http://home.fuse.net/ryan/ . For blotting up excess epoxy, I use a roll of toilet paper. "Roll" the roll on the surface to remove the excess, and when that "layer" of paper gets saturated, unroll it to expose fresh paper. --Bill >From: Dick Williamson <[EMAIL PROTECTED]> >To: "Stan & Mary Jo Myers" <[EMAIL PROTECTED]> >CC: [EMAIL PROTECTED] >Subject: Re: [RCSE] Glassing balsa fuse >Date: Mon, 2 Jul 2001 10:12:16 -0400 > >Stan, > >You asked: > >>Also, I remember reading about spraying 3m on the glass and putting on wax >>paper, can someone direct me the that article or briefly tell me how its >>done? >> > >An update of the original article in Model Aviation is on the Charles >River RC web site at: > >http://www.charlesriverrc.org/articles/construction/williamson_fiberglass.htm > >Dick > >-- >- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - >Dr. Richard C. Williamson Phone: 781-981-7857 >Room C-317 FAX: 781-981-0122 >Lincoln Laboratory Email: [EMAIL PROTECTED] >Massachusetts Institute of Technology >244 Wood Street >Lexington, MA 02420-9108 >- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - >RCSE-List facilities provided by Model Airplane News. Send "subscribe" and >"unsubscribe" requests to [EMAIL PROTECTED] _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]