Check the switch your dual rates are assigned to and make sure it isn't set to a stick switch (SSW). If so, this could potentially REALLY mess you up. ----- Original Message ----- From: "David A. Enete" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 18, 2001 12:01 PM Subject: Re: [RCSE] Problem with my Stylus > >Between rounds I checked the > >programming and found that when the launch switch was in the reflex position > >I had even more down elevator. It looked like my programming changed when I > >flipped the launch switch just before the zoom. I always program the flying > >and reflex position of the launch switch the same and they somehow changed > >during my flight. My transmitter is 3 years old and I wondered if the > >internal battery could be low. I will measure it tonight. > > Although I haven't done this, Gordy passed it along to me (said that > Tom Hoopes recommended it)...reinitialize the Stylus routinely. > > According to GS, just backup everything to your memory card (you do > have one, don't you?). Then, pull all cards, power up and > re-initialize to factory settings (can't remember off the top of my > head the re-init process...menus?). Then reload your glider card, > and planes from the mem. card. > > I guess you never know what little gremlins could be jumping from IC > to IC in there. > > - David > [EMAIL PROTECTED] > > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
