>>I'm building a two meter plane which provides at least a reasonable
wingspan concerning visibility, however, I need this plane to be viewable
by individuals with impaired vision.  What colors/color scheme would be
suggested?  I need the best possible for this demonstration to be a
success.

Viewable? If you mean flyable then look to a competition.  Almost all
competition planes are colored to fly at the absolute limit of their pilot's
vision.  The undersides are dark, often the black of unpainted graphite.
Their topsides are lighter colored so you can tell which way is up when you
get into a "situation". I prefer white topsides with a large neon red mark
on one tip.  This gives assymetry, which is another help to orientation.

If your wing is open-bay then I might be tempted to go with a transparent
orange or yellow on BOTH top and bottom surfaces.  It will look great in the
air.

HTH,

Jeb.



"Flash" tape (reflective tape and holographic tape) I here could be very
useful.  Your thoughts on this would be truly appreciated.

Patrick Lanphier
The Artemis Group
http://www.artemisgroup.com
phone: 235-0444
  fax: 800-582-9710

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to