Tony. . .find a drinking glass with tapered sides that is a bit undersized on one end and about right on the other. Apply sandpaper to it with 3M 77. Use your Exacto to make a hole large enough to receive the undersized end, then rotate the glass toward the other end, smoothing and enlarging the hole as you go. ----- Original Message ----- From: "Tony J. O'Hara" <[EMAIL PROTECTED]> To: "Soaring List server" <[EMAIL PROTECTED]> Sent: Saturday, September 01, 2001 8:12 PM Subject: [RCSE] Cutting round holes in balsa sheet! > Hi > Does anyone have a good method of cutting large round holes (1/2" to 2" > dia) in thin balsa sheet? > Thanks > Tony > Colorado > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]