I have a Wipa "Firecat" which is a 33 in span, 32 oz weight, JETI
"Phasor" 15-4 brushless powered full-house ARF from the Czech
Republic, handled in the US by Hobby Lobby. I've got about 20
flights of 5 min on it. Also, quite a few repairs, mainly caused by
it being a little more than I can handle on landings. Fast is the
operative word!
I decided to set my JR XF421EX (6 ch - 3 model) system up for
flaperons to be used to slow it down a little on landings. Years ago
I flew "split" flaps on a 10 ft sailplane; and what I remember is
them slowing it down nicely AND for god's sake be ready with DOWN
elevator to preclude stalling.
The Firecat has full-span tapered ailerons for which I had set the
servo arms (0.28in) and elevator horns(1.06in) to produce + and - 10
deg of throw. Next I removed the two servos from a "Y" harness into
the aileron channel and plugged one servo into the aileron channel
and the other into the "gear" channel. With the 2-position gear
switch in one position both ailerons were fully up (about +10 deg)
and with the switch in the opposite position both ailerons were fully
down (about -10 deg).
Since this was not the desired configuration, I first set the gear
switch to get both ailerons fully up. Then I removed both aileron
servo arms, rotated them to get the ailerons back to their neutral
positions (0 deg) and then reinstalled them. Now the "gear" switch
produces 0 deg in one position and -20 deg in the other for both
ailerons.
The problem I've noticed is that the aileron action is now different.
At 0 deg flaps I get about 2 deg up and 14 deg down. With the flaps
at -20 deg I get about 8 deg up and 10 deg down.
If anyone who has done this successfully could point out either
errors I've made or steps I left out (or both) I would deeply
appreciate it. As you can guess, I would really like to get 0 deg to
-20 deg for flap action; and + and - 10 deg for aileron action
anywhere over the flaps' range.
Sincerely,
Bob
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]