Pay a visit to your local airfield,
ask a plane mechanic for a length of aircraft lockwire. I use the 0.020"
size, stainless steel, you can really crank the tension on it right
up.
Les.
Message: 21 Date: Wed, 21 Nov 2001 19:20:26 -0600 From: "Tim McCann" <[EMAIL PROTECTED]> Subject: Re: [RCSE] wire for foam cutter Martin How about .030 SS mig welding wire. 2lb roll $15.95 From http://www.grizzly.com/index.html or $17.95 from http://www.mcmaster.com/ or check with your local welding supply store. 2lbs would probably be enough for everyone on the list. Tim McCann [EMAIL PROTECTED] www.superskeg.com ----- Original Message ----- From: Martin Cleary To: [EMAIL PROTECTED] Sent: Wednesday, November 21, 2001 6:37 PM Subject: [RCSE] wire for foam cutter Gents, I am building a foam cutting set up based on tidbits of info from the web. I was looking for ss wire and found none in small sizes. I bought some piano wire in .024. Will this work? Thanks. If my set up works, I'll post pics as it is low cost, easy to build, and quick to set up/tear down. Martin |