On Mon, 31 December 2001, "Rick Van Clief" wrote:

> Do you (or anyone) have dihedral information on the Searcher LAR 2M?  I'm
> scaling off plans from an old magazine article (dihedral information is not
> given on the plans, alas) and am coming up with inner panel dihedral about
> 2.5 degrees and out panel dihedral about 10 degrees for EDA of about 6.0.
> Seems kind of low for a poly RES.

6 degrees EDA per side seems low to me too. I'd be inclined to double that figure and 
also enlarge the vertical tail height by 50% to increase the yaw damping. There is a 
wide range of opinion on the correct size of vertical tail and dihedral. My preference 
is for more tail and dihedral than you typicaly see.  

Liftroll is at: http://www.geocities.com/jebbushell/COOKBOOK.htm 
Find the best deals on the web at AltaVista Shopping!
http://www.shopping.altavista.com
RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to