From M&M <[EMAIL PROTECTED]>   Hello, I have an old Windfree that 
came to earth awhile back as a meteor and I am having difficulty removing a 
bunch of the old covering off of the wing. Is there a trick to getting it 
all off easily? Picking and scraping with an exacto knife is taking 
forever... Thanks, MM

What's the trick to removing old covering!!??  Michael!!  It is so 
simple--never mind it took me a while to discover it for myself :-) !!  Now 
don't feel too foolish!!  BUT!! IF you are removing old covering, I ASSUME 
(dangerous) you are also planning to recover--is my assumption warranted 
:-) !!??  IF not ignore the following :-) !!  IF so!!  Take your covering 
iron and iron it off--heat and pull :-) !!  You may end up with some of the 
film color on the airframe, but small penalty; it should peel off nicely 
for you!  I use to rebuild crashed birds of friends being on a low 
budget--those were power days; BUT my present project is a rebuild of the 
classic Hobie Hawk ala'gracias-Bacus (last Christmas) and formerly a Gordy 
Bird--it shall soar again!!  Also, have a 3M nostalgia hangar queen rebuild 
of a Japanese Hasegawa 3200 mm Reiher.  The above process will also allow 
you to save decals, etc, with some ease if desired :-) !  NOW!  Put away 
the Xacto knife, get out the iron and with an ole'one-two remove and 
recover and get flying--to the FUN part!!

Paul Clark, SKY PILOT ONE, Osaka, Japan    (AMA # 53 777 1)
http://www.kcat.zaq.ne.jp/skypilot/
SKY PILOT'S HANGAR--RCHLG AFICIONADO

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to