On Wed, 9 Jan 2002, Michael Imsic wrote:

> 3M has a low tack blue masking tape which is designed for masking prior to
> painting.  Sounds like it would be perfect.

Ah, good advice.  I'll see if it's in the local art supply place.

-J

> 
> Michael
> 
> > -----Original Message-----
> > From: Monkey King [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, 9 January 2002 12:11 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [RCSE] Kevlar cutting
> >
> >
> > On Tue, 8 Jan 2002, Rick and Jill wrote:
> >
> > > Doesn't this cause a fraying of the edges when you pull off the tape??
> >
> > A little.  I pull away from the body of the fabric, and it
> > seems OKish.  I
> > think the next experiment is to do it with drafting tape, which is a
> > little less sticky.
> >
> > -J
> >
> > > ----- Original Message -----
> > > From: "Monkey King" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Tuesday, January 08, 2002 8:44 AM
> > > Subject: [RCSE] Kevlar cutting
> > >
> > >
> > > > I don't know if this is just the common technique for
> > cutting aramid, or
> > > > if I've come across something good, but I do know that
> > someone was asking
> > > > about good shears for cutting the stuff a week or so ago.
> > Maybe this will
> > > > help the rest of us, as it doesn't require destroying your
> > SO's favorite
> > > > shears:
> > > >
> > > > Outline the cut your are going to make in masking tape on
> > both sides.
> > > > Press the tape down hard so it's stuck firmly - no wrinkles
> > or bulges on
> > > > either side.  Then cut down the tape longways.  This way,
> > you can mark
> > > > your pattern on the cloth with the tape and cut through cleanly.
> > > >
> > > > Am I making the newbie error of stating the known?  If
> > there's more to
> > > > this technique than I've discovered, please let me in on the secret!
> > > >
> > > > -J
> > > >
> > > > RCSE-List facilities provided by Model Airplane News.  Send
> > "subscribe"
> > > and "unsubscribe" requests to [EMAIL PROTECTED]
> > >
> >
> > RCSE-List facilities provided by Model Airplane News.  Send
> > "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
> 
> 
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> 
> RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
>"unsubscribe" requests to [EMAIL PROTECTED]
> 

RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to