I have to concur with Dale’s comments. I have put together four Stratos all with JR Digitals in the wings and standard 341’s for the fuse, all have worked excellent. They are readily available and you can easily get parts for them if needed.

 

With regard to mountings in the wings I have been using a set of servo mounting lugs from Hobby Lobby. This bracket is basically an inverted T-shape. The base is what glues to the upper skin of the wing. The vertical is the perfect fit for a JR mounting lug to slide down in. There is a screw boss on the vertical. It was designed with a matching cap that I don’t use because I shave the vertical height to just shy of the same thickness as the servo. I then make rectangular flat washers that lay across the top of the vertical with a hole in them to accept the screw. When the screw is tightened it pushes the servo down against the top skin holding the servo very firmly. I have not had a bracket come loose yet, even in a crash. We have also found that if you happen to land and hit a flap, the servo will pop out of the bracket under high force and not damage either the servo or the wing. These things are great because you can slide the servos in and our as needed especially during setup to get the arms set correctly. They also allow you to change out servos if required, though I haven’t used that feature yet. As far as weight is concerned, they are just small nylon pieces and if they weight an ounce for eight required on a wing I’d be surprised.

 

Jeff Naber

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 11, 2002 9:14 AM
To: [EMAIL PROTECTED]
Subject: [RCSE] Re: Soaring V1 #604-Servo Recommendations for a Stratos SL-e Message

 

I have been flying a Stratos SL-e for nearly two years (200 or more flights) with Volz Micro Maxx and Micro Max X servos with an Airtronics Vision and Stylus Systems.  I much prefer the Micro Max X servos.  Volz has a new servo, XP that is probably a further improvement.  I have had some trouble with Micro Maxx servos, but the biggest problem with Volz is that there is no factory authorized repair service (Pardon me Gordy, I appreciate your efforts to help).

When setting up my backup Stratos SL-e, I have used JR 341s with JR 368 digitals for flaps.  I am very satisfied with their performance on their first 25 flights using an Airtronics Vision System.  My flying friends are using JR and Airtronics servos in their Stratos SL-e sailplanes for more than a year with excellent results.

It is very important to install the wing servos in removable mounts.  It is a big mistake to glue them in, as recently recommended in SE Modeler, so that they are not easily removable for adjustment and repair.

Dale Nutter
[EMAIL PROTECTED]

Reply via email to