Tony,
You can use an in-line servo reverser that will take care of this problem.
I had to use one on my first unlimited.
Only problem with y-harness flaps is synch'ing the geometry.
There are also in-line reverser/mixers that should solve the problem
Mark
-----Original Message-----
From: Tony J. O'Hara [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 08, 2002 10:24 AM
To: Douglas, Brent
Cc: Tony J. O'Hara; [unknown]
Subject: RE: [RCSE] RE: radio set up question, or
what am I going to have to settle f or.. ...
>I think I got it now - if gang my flaps with a Y, I'm ok..<
Just in case, Brent!
I thought I could do that with my son's newly acquired
Emerald until I
realized the flap servos are mounted as mirror images of
each other. So one
would go up the other down if connected with "Y"
We have to use a radio that will allow mixing-and reversing
of 2 channels
just for flaps!
Tony
Colorado
RCSE-List facilities provided by Model Airplane News. Send
"subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]
********************************************************************************
This message is intended only for the use of the Addressee and may
contain information that is PRIVILEGED and CONFIDENTIAL.
If you are not the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited. If you have
received this communication in error, please erase all copies of the
message and its attachments and notify Space Imaging immediately.
********************************************************************************
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
