> in 1# EPS
>
> Root Chord: 12"
> Tip Chord: 5"
> Wing Span: 34" (17" per wing)
> Airfoil: SD7003 with thickness at 8.514% and camber at 1.482%
>From what I understand the original foil was modified at under side of the
trailing edge area.
It has a good roll rate and is very aerobatic.
That being said, here comes the shameless plug!
For $39.00 (shipping included) you can get the ALL EPP Noseeum which can be
built in a number
of different configurations. As a DLG it will out thermal ANY similar sized
plane I have seen and quite a few 60" HLG's. It doesn't have the roll rate
of the Herring, but it is fairly aerobatic on the slope.
I am in the process of rewriting the instructions and releasing a carbon
spar DLG version which will be about
$47.00 shipped It will have a carbon wing spar and tail boom and I have
switched to 2mm coroplast for the tail.
I also have come up with a way to turbulate the LE to restore the low speed
handling that is lost when you tape the LE. This version really works well
and is very indestructable like a foamie should be!
Mark Mech
[EMAIL PROTECTED]
remove NOSPAM the address
or just hit "reply"
www.aerofoam.com
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
