Sherman, Can't help you with the carbon rod, but I know Don Richmond makes all kinds of aluminum joiners. Try http://www.hilaunch.com/
JE -- Erickson Architects John R. Erickson, AIA > From: [EMAIL PROTECTED] > Date: Thu, 25 Jul 2002 12:16:41 EDT > To: [EMAIL PROTECTED] > Subject: [RCSE] Need wing rods with more dihederal > > Any one making wing rods out there. I am looking for a 1/2 inch carbon wing > rod with more break. More like 10 degrees. I am also looking for a 3/8 inch > aluminum rod for a two meter. Also with more like 10 degrees. Finally I am > looking for a wing rod for an Omega 1.8. The current wing rod is flat. > Looking for 6 degrees or so. I do not know the diameter. It appears that > the joiner tubes are metric. > > Any help at all would be appreciated. > > Sherman L Knight > The Law Offices of Sherman L. Knight > 5400 Carillon Point > Kirkland WA 98033 > 425-576-4028 WK 425-576-4029 FAX > [EMAIL PROTECTED] > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED]