Hi Oscar, Try drilling holes in 32nd plywood and putting this on each side where your stab plugs in. Cut this like small washers about 1/2 in. in diameter and this will strengthen the tube through your rudder. Thermals, Art
Oscar Taboada wrote: > Hi, > > I have noticed that the stab of my Dynaflite BOT after less than 10 flights > is very loose. > > the problem is that the hole I drilled in the hardwood block, where the > small and fixed pipe is inserted has been enlarged, because a not so nice > landing > > my question is if it would be a good idea to reinforce it.. I am thinking to > glue some small triangles on each side of the tube in horizontal position, > this way there will be no extra drag, but that will not be useful for some > vertical enlargement of the hole. I am thinking also to glue some small > washers (made of balsa) to build a cone around the tube and soak them with > cyanoacrilate > > thanks for your comments and suggestions > > Oscar Taboada > Mexico > > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and >"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and >unsubscribe messages must be sent in text only format with MIME turned off. RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.