Hitec receivers work fine with Futaba transmitters, provided that the Hitec rx was either made to work with either Futaba or Hitec (non JR or Airtronics). This is true in the USA, at least.
You can change the Hitec receiver channel to anything you want without having to retune it..after all, they sell the receivers with no crystals in them to begin with. The only way to change the transmitter frequency is to get a new frequency module, though, which is somewhat expensive (around $50) in comparison the a $10 receiver crystal for the receiver. At 07:21 PM 1/1/03 -0000, alliance43701 <[EMAIL PROTECTED]> wrote: >I just bought a Futuba 9CAF, and it has 8 model memory. I would like >to know if it is possible to, use a Hitec receiver. >The Futuba is on Ch 56 and the Hitec is on Ch 30, can I just change >the crystal or do I have to send it in to tune it? >Would appreciate any and all input! >I would like to thank everyone in advance for their input! > Joe > >RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. > RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off.